Sales Hotline: +44 (0)1492 541300

Weapons

7 Item(s)

Set Ascending Direction
per page

Grid  List 

  • Nashville Plow Works Cavalry Sabre

    This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs. Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

    Total length: 99 cm
    Blade length: 86.5 cm
    Grip length: 11.5 cm
    Weight: 860g
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.2 mm
    Blade width (base): 2.9 cm
    Blade width (base): 2.4 cm
    Point of Balance (PoB): 9 cm
    Centre of Percussion (CoP): 26.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £136.62 Incl. Tax: £163.94

  • US Navy Cutlass M1860

    Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it. Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

    Total length: 80 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.86 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £111.38 Incl. Tax: £133.66

  • US Navy Cutlass M1860 - Gold

    Since 1860, the US Navy Cutlass M1860 Gold has been produced for the American armed forces at sea – just in time for the American Civil War! It replaces model M1841, and was inspired by the French Navy saber. The curved blade typical of sabers has a wide fuller that ends at the same place the broad back does – the spot where the false edge starts. Its blade geometry gives the US Navy Cutlass M1860 Gold a relatively light weight, but it was also made to be slightly top-heavy to give cuts more power. Held in place by a riveted pommel and the 24 K gold-plated full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. The US Navy Cutlass M1860 Gold comes with a matching leather scabbard with belt loop and a cloth bag for transport and storage.

    Total length: 81 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.9 kg
    Blade thickness (base): 4.9 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £201.04 Incl. Tax: £241.25

  • Confederate Sabre

    Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability. The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

    Total length: 100.5 cm
    Blade length: 86 cm
    Grip length: 10.5 cm
    Weight: 1.02 kg
    Blade thickness (base): 4.6 mm
    Blade thickness (CoP): 3.9 mm
    Blade width (base): 3 cm
    Blade width (base): 2.5 cm
    Point of Balance (PoB): 19 cm
    Centre of Percussion (CoP): 21 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardSteel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £107.92 Incl. Tax: £129.50

  • American Revolutionary War Sabre

    Dated to around 1775, the prototype for this handsome sabre is pictured in "Swords & Blades of the American Revolution," a book by George C. Neumann that is very popular with collectors and sword fans. The single-edged, subtly curved blade has two fullers. A narrow, deep fuller almost runs along the entire length of the blade. The other one is shorter, shallower, and much wider. Because of them, this amazing saber weighs less than one kilogram. Nevertheless, our American Revolutionary War sabre is perfectly balanced for delivering mighty cuts: like most powerful cutting weapons, it is slightly top-heavy. The spiraling wooden grip is comfortable and easy to control, and the knuckle bow provides added hand protection.

    Total length: 100.5 cm
    Blade length: 86 cm

    Grip length: 10 cm 
    Weight: 0.95 kg 
    Blade thickness (base): 4.7 mm 
    Blade width (base): 3.3 cm 
    Point of Balance (PoB): 19 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £107.88 Incl. Tax: £129.46

  • Red Dragon Combat Temple Church Sword

    Our Temple Church sword is a replica of a sword found in the River Thames in London. The sword, forged in the period between 1300-1350, was discovered opposite Temple Church, the headquarters of the Knights Templar in England. During the 14th century, the gardens of the Temple in London ran down to the river’s edge where this sword was discovered. The discovery location, coupled with the crosses in the pommel, suggests that it is a Templar knight’s sword thrown into the river when the Order of the Temple was dissolved by Edward II in 1314.

    Overall Length: 127.5cm
    Blade Length: 100.5cm
    Blade Width: 5cm
    Blade Thickness: 0.4cm
    Guard Width: 20cm
    Point of Balance: 20cm
    Weight: 1356g
    Material: High Carbon Steel Blade, Leather Grip
    Edge: Blunt - 1.5mm
    Pommel: Peened
    Scabbard: Wood, leather, steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £162.50 Incl. Tax: £195.00

  • Red Dragon Combat - Bastard Sword

    1 Review(s)

    Our Red Dragon swords feature high carbon EN42J Spring Steel blades that have been forged and tempered to perform like their historical counterparts. They have a core hardness of 45HRC approx. with an edge hardness of 50HRC approx. The hilts feature authentically styled forged guards and pommels constructed from steel, and wooden grips that are masterfully wrapped in leather cord for an aesthetic yet comfortable finish. They come complete with leather-wrapped wooden scabbards and authentically styled integrated leather belts.

    Overall Length: 114cm
    Blade Length: 91cm
    Blade Width: 5cm
    Blade Thickness: 0.5cm
    Guard Width: 19.5cm
    Point of Balance: 15cm
    Weight: 1100g
    Material: High Carbon Steel Blade, Leather Grip
    Edge: Blunt/Sharp
    Pommel: Peened
    Scabbard: Wood, leather, steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £125.00 Incl. Tax: £150.00

7 Item(s)

Set Ascending Direction
per page

Grid  List 

Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76