Sales Hotline: +44 (0)1492 541300

Weapons

Items 1 to 10 of 16 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • Stage Combat Rapier

    Stage combat rapiers have to meet different requirements from battle-ready rapiers. In order to minimize the risk of injury from cuts and thrusts during stage combat with fencing weapons, this silver stage combat rapier has back edges that are at least 3 mm thick everywhere and it even has a flattened point. It weighs a little less than a kilogram, so our silver stage combat rapier is light and highly manageable. Good balance is not the only characteristic that makes this stage combat rapier manageable – its grip is also very important. Because it is wrapped with both smooth and braided silver-coloured wire, it is especially comfortable to grasp. The delicate knuckle bow and finger guard give this stage combat rapier a graceful, romantic look and also provide finger protection when a technique requires them to be placed above the crossguard. It includes a leather scabbard with a silver-coloured mount and chape.

    Total length: 109 cm
    Blade length: 92.5 cm
    Grip length: 10 cm
    Weight: 0.96 kg
    Blade thickness (base): 3.8 mm
    Blade width (base): 1.7 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardLeather, Wood, Steel

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £148.50 Incl. Tax: £178.20

  • Stage Combat Rapier - Brass

    Stage combat rapiers have to meet different requirements than battle-ready rapiers do. In order to minimize the risk of injury from cuts and thrusts during stage combat with fencing weapons, this golden stage combat rapier has back edges that are at least 3 mm thick everywhere and it even has a flattened point.

    It only weighs a little over a kilogram, so our golden stage combat rapier is light and highly manageable. Good balance is not the only characteristic that makes this stage combat rapier manageable – its grip is also very important. Because it is wrapped with both smooth and braided golden wire, it is especially comfortable to grasp. The delicate knuckle bow and finger guard give this rapier a graceful, romantic look and also provide finger protection when a technique requires them to be placed above the crossguard. The pommel is bolted on. Of course this golden stage combat rapier comes with a leather scabbard with a golden mount and chape.

    Total length: 108 cm
    Blade length: 92 cm
    Grip length: 10 cm
    Weight: 1.08 kg
    Blade thickness (base): 3.8 mm
    Blade width (base): 1.6 cm
    Point of Balance (PoB): 9 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardLeather, Wood, Brass

    All sizes are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £161.88 Incl. Tax: £194.26

  • Stage Combat Arming Sword

    Stage combat swords have to meet different requirements than battle-ready swords do. In order to minimize the risk of injury from cuts and thrusts during stage combat with swords, this one-handed stage combat sword has back edges that are at least 3.5 mm thick everywhere and it even has a rounded point.

    The thick blade of our one-handed stage combat sword makes it somewhat more top-heavy than a comparable battle-ready sword would be. The grip is ridged in three places and is wrapped in genuine leather for increased control and comfort. Our one-handed stage combat sword has a riveted wheel pommel typical of swords that were made between the 10th and 15th centuries, but the curved crossguard places it firmly in the 14th/15th century. This one-handed stage combat sword includes a scabbard made of genuine leather with a mount and chape.

    Total length: 99.5 cm
    Blade length: 82 cm
    Grip length: 10.5 cm
    Weight: 1.49 kg
    Blade thickness (base): 3.8 mm
    Blade thickness (CoP): 4 mm
    Blade width (base): 5 cm
    Blade width (CoP): 3.3 cm
    Point of Balance (PoB): 17 cm
    Centre of Percussion (CoP): 17 cm
    Oakeshott type: XVIIId
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardLeather, Wood, Steel

    All sizes are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

  • Stage Combat Crusader Arming Sword

    Stage combat swords have to meet different requirements than battle-ready swords do. In order to minimize the risk of injury from cuts and thrusts during stage combat with swords, this one-handed stage combat sword has back edges that are at least 3 mm thick everywhere and it even has a rounded point.

    The thick blade of our one-handed stage combat sword makes it somewhat more top-heavy than a comparable battle-ready sword would be. The grip with a spiraling groove is wrapped in genuine leather for increased control and comfort. Our Crusader stage combat sword has a riveted wheel pommel etched with a Crusader cross. The pommel and straight crossguard best date the sword to the 12th/13th century.This Crusader stage combat sword includes a scabbard made of genuine leather with a mount and chape.

    Total length: 99.5 cm
    Blade length: 82 cm
    Grip length: 10.5 cm
    Weight: 1.49 kg
    Blade thickness (base): 3.8 mm
    Blade thickness (CoP): 4 mm
    Blade width (base): 5 cm
    Blade width (CoP): 3.3 cm
    Point of Balance (PoB): 17 cm
    Centre of Percussion (CoP): 17 cm
    Oakeshott type: XVIIId
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardLeather, Wood, Steel

    All sizes are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

  • Stage Combat Longsword - Brass

    Stage combat swords have to meet different requirements than battle-ready swords do. In order to minimize the risk of injury from cuts and thrusts during stage combat with swords, this elegant two-handed stage combat sword has back edges that are at least 3 mm thick everywhere and it even has a rounded point.

    Despite its respectable size, our elegant two-handed stage combat sword is highly manageable. The leather wrapped grip and the fuller that runs more than two-thirds of its length add control and comfort and make this stage combat sword comparatively light, while the noble, riveted wheel pommel provides a counterweight for good balance. The graceful curve of the golden crossguard adds to the overall elegance of this two-handed stage combat sword. It includes a scabbard made of genuine leather with a golden mount and chape.

    Total length: 125 cm
    Blade length: 97 cm
    Grip length: 21 cm
    Weight: 1.64 kg
    Blade thickness (base): 3.3 mm
    Blade thickness (CoP): 3.5 mm
    Blade width (base): 5 cm
    Blade width (CoP): 3.8 cm
    Point of Balance (PoB): 19 cm
    Centre of Percussion (CoP): 29 cm
    Oakeshott type: XIIIa
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Wood, Leather, Brass

    All sizes are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £132.17 Incl. Tax: £158.60

  • Stage Combat Two-Handed Sword

    Stage combat swords have to meet different requirements than battle-ready swords do. In order to minimize the risk of injury from cuts and thrusts during stage combat with swords, this elegant two-handed stage combat sword has back edges that are at least 3 mm thick everywhere and it even has a rounded point.

    Despite its respectable size, our two-handed stage combat sword is surprisingly manageable. This is primarily due to the fuller that runs more than three-quarters of the length of the sword, the two-handed grip covered in red fabric, and the large, riveted wheel pommel that serves as a counterweight to provide this two-handed stage combat sword with excellent balance. Clear, straight lines give this stage combat sword its simple beauty. It includes a genuine leather scabbard with a mount and chape.

    Total length: 126 cm
    Blade length: 97.5 cm
    Grip length: 22.5 cm
    Weight: 1.97 kg
    Blade thickness (base): 3.5 mm
    Blade thickness (CoP): 3.5 mm
    Blade width (base): 5.1 cm
    Blade width (CoP): 3.6 cm
    Point of Balance (PoB): 15.5 cm
    Centre of Percussion (CoP): 31 cm
    Oakeshott type: XIIIa
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Pommel
    ScabbardWood, Leather, Steel

    All sizes are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £141.08 Incl. Tax: £169.30

  • Nashville Plow Works Cavalry Sabre

    This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs. Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

    Total length: 99 cm
    Blade length: 86.5 cm
    Grip length: 11.5 cm
    Weight: 860g
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.2 mm
    Blade width (base): 2.9 cm
    Blade width (base): 2.4 cm
    Point of Balance (PoB): 9 cm
    Centre of Percussion (CoP): 26.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £136.62 Incl. Tax: £163.94

  • US Navy Cutlass M1860 - Gold

    Since 1860, the US Navy Cutlass M1860 Gold has been produced for the American armed forces at sea – just in time for the American Civil War! It replaces model M1841, and was inspired by the French Navy saber. The curved blade typical of sabers has a wide fuller that ends at the same place the broad back does – the spot where the false edge starts. Its blade geometry gives the US Navy Cutlass M1860 Gold a relatively light weight, but it was also made to be slightly top-heavy to give cuts more power. Held in place by a riveted pommel and the 24 K gold-plated full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. The US Navy Cutlass M1860 Gold comes with a matching leather scabbard with belt loop and a cloth bag for transport and storage.

    Total length: 81 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.9 kg
    Blade thickness (base): 4.9 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £201.04 Incl. Tax: £241.25

  • Confederate Sabre

    Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability. The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

    Total length: 100.5 cm
    Blade length: 86 cm
    Grip length: 10.5 cm
    Weight: 1.02 kg
    Blade thickness (base): 4.6 mm
    Blade thickness (CoP): 3.9 mm
    Blade width (base): 3 cm
    Blade width (base): 2.5 cm
    Point of Balance (PoB): 19 cm
    Centre of Percussion (CoP): 21 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardSteel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £107.92 Incl. Tax: £129.50

  • American Revolutionary War Sabre

    Dated to around 1775, the prototype for this handsome sabre is pictured in "Swords & Blades of the American Revolution," a book by George C. Neumann that is very popular with collectors and sword fans. The single-edged, subtly curved blade has two fullers. A narrow, deep fuller almost runs along the entire length of the blade. The other one is shorter, shallower, and much wider. Because of them, this amazing saber weighs less than one kilogram. Nevertheless, our American Revolutionary War sabre is perfectly balanced for delivering mighty cuts: like most powerful cutting weapons, it is slightly top-heavy. The spiraling wooden grip is comfortable and easy to control, and the knuckle bow provides added hand protection.

    Total length: 100.5 cm
    Blade length: 86 cm

    Grip length: 10 cm 
    Weight: 0.95 kg 
    Blade thickness (base): 4.7 mm 
    Blade width (base): 3.3 cm 
    Point of Balance (PoB): 19 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £107.88 Incl. Tax: £129.46

Items 1 to 10 of 16 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76