Sales Hotline: +44 (0)1492 541300

Weapons

Items 1 to 10 of 19 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • Hutton Duelling Sabre

    1 Review(s)

    One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th-century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military sabre. The Milanese fencing master Guiseppe Radaelli is credited with developing this style, while Salvatore Pecoraro introduced refinements which resulted in the technique finally adopted at the Military Masters School in Rome. The hilt designs have been replicated in these training sabres, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The high-carbon flex-tempered steel blades by Windlass Steecrafts closely follow the proportions of the period and have blunt edges and rounded tip for safety. Includes matching, full metal scabbard.

    *The above is the manufacturer's description. We think that the "rounded tip" featured on this blade is far too pointy for safe sparring/thrusting. If you intend to spar with this sword, it is imperative that the tip should be rounded off more and tipped with a rubber or metal cap. 

    Overall: 95cm
    Blade Length: 79cm
    Handle: 15cm
    Weight: 624g

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £104.17 Incl. Tax: £125.00

  • Wooden Roman Gladius (Rudis)

    PLEASE NOTE: NO WARRANTY IS OFFERED WITH THIS PRODUCT. IF YOUR WASTER BREAKS, NO REPLACEMENT WILL BE OFFERED AS THE MANUFACTURER WILL NOT SUPPLY US WITH A REPLACEMENT. IF YOU WANT A MORE DURABLE WASTER PLEASE PURCHASE OUR SYNTHETIC SPARRING SWORDS.

    The gladius was the sword of choice for the Roman legions, and many gladiators also chose to use the double-edged sword when they were fighting for their freedom and lives in the Colosseum.After a gladiator in ancient Rome had won his freedom, he was awarded a wooden gladius like this one, called a Rudis, as a symbol of his freedom. Our Rudis is a great retirement gift for military personnel or police officers.

    Our training gladius is based on the classic Roman gladius and made entirely of hardwood. The pommel and guard are darker for visual interest. If you plan to use this wooden gladius as a training sword, be careful: the blade is made of wood but it does have a sharp point.

    Overall Length: 69cm
    Blade Length: 51cm 
    Blade Width: 4.5cm
    Blade Thickness: 1.6cm
    Weight: 340g

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £29.83 Incl. Tax: £35.80

  • Wooden Longsword (Waster)

    PLEASE NOTE THAT NO GUARANTEE IS OFFERED WITH THIS PRODUCT. IF YOUR WASTER BREAKS NO REPLACEMENT WILL BE OFFERED AS THE MANUFACTURER WILL NOT SUPPLY US WITH A REPLACEMENT. IF YOU WANT A MORE DURABLE WASTER PLEASE PURCHASE OUR SYNTHETIC SPARRING SWORDS.

    The advantages of this two handed training sword made of wood are obvious. On the one hand, the risk of injury is significantly lower. On the other, this wooden sword can withstand hard blows while your valuable steel sword is safe at home. Of course, even hardwood is not indestructible and can break along the grain, but this two handed training sword should be your first choice for practicing. The wheel pommel and crossguard are made of darker wood to emphasize that it looks like a sword from the 12th to 15th century.

    Total length: 121 cm
    Blade length: 92.5 cm
    Grip length: 20 cm
    Weight: 0.59 kg
    Point of Balance (PoB): 21 cm

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £32.50 Incl. Tax: £39.00

  • Wooden Arming Sword (Waster)

    PLEASE NOTE THAT NO GUARANTEE IS OFFERED WITH THIS PRODUCT. IF YOUR WASTER BREAKS NO REPLACEMENT WILL BE OFFERED AS THE MANUFACTURER WILL NOT SUPPLY US WITH A REPLACEMENT. IF YOU WANT A MORE DURABLE WASTER PLEASE PURCHASE OUR SYNTHETIC SPARRING SWORDS.

    The advantages of this one handed training sword made of wood are obvious. On the one hand, the risk of injury is significantly lower. On the other, this wooden sword can withstand hard blows while your valuable steel sword is safe at home. Of course, even hardwood is not indestructible and can break along the grain, but this one handed training sword should be your first choice for practicing. The wheel pommel and crossguard are made of darker wood to emphasize that it looks like a sword from the 12th to 15th century.

    Total length: 99.5 cm
    Blade length: 79.5 cm
    Grip length: 11.5 cm
    Weight: 0.54 kg
    Point of Balance (PoB): 22 cm

    All dimensions are approximate and may vary from piece to piece

    Learn More
    Excl. Tax: £29.83 Incl. Tax: £35.80

  • Nashville Plow Works Cavalry Sabre

    This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs. Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

    Total length: 99 cm
    Blade length: 86.5 cm
    Grip length: 11.5 cm
    Weight: 860g
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.2 mm
    Blade width (base): 2.9 cm
    Blade width (base): 2.4 cm
    Point of Balance (PoB): 9 cm
    Centre of Percussion (CoP): 26.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £113.88 Incl. Tax: £136.66

  • US Navy Cutlass M1860 - Gold

    Since 1860, the US Navy Cutlass M1860 Gold has been produced for the American armed forces at sea – just in time for the American Civil War! It replaces model M1841, and was inspired by the French Navy saber. The curved blade typical of sabers has a wide fuller that ends at the same place the broad back does – the spot where the false edge starts. Its blade geometry gives the US Navy Cutlass M1860 Gold a relatively light weight, but it was also made to be slightly top-heavy to give cuts more power. Held in place by a riveted pommel and the 24 K gold-plated full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. The US Navy Cutlass M1860 Gold comes with a matching leather scabbard with belt loop and a cloth bag for transport and storage.

    Total length: 81 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.9 kg
    Blade thickness (base): 4.9 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £201.04 Incl. Tax: £241.25

  • Confederate Officer Sabre

    This Confederate Officer Saber is basically the Southern version of the "M1850 Army Staff and Field Officers Sword." Sabers like this one were very popular with soldiers on both sides of the Mason-Dixon Line during the American Civil War (1861-1865).

    Total length: 93 cm
    Blade length: 78 cm
    Grip length: 10.5 cm
    Weight: 0.9 kg
    Blade thickness (base): 4.5 mm
    Blade width (base): 2.6 cm
    Point of Balance (PoB): 14 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardWood, Leather, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £101.20 Incl. Tax: £121.44

  • Confederate Sabre

    Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability. The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

    Total length: 100.5 cm
    Blade length: 86 cm
    Grip length: 10.5 cm
    Weight: 1.02 kg
    Blade thickness (base): 4.6 mm
    Blade thickness (CoP): 3.9 mm
    Blade width (base): 3 cm
    Blade width (base): 2.5 cm
    Point of Balance (PoB): 19 cm
    Centre of Percussion (CoP): 21 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardSteel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £101.20 Incl. Tax: £121.44

  • Yankee Officer's Sabre 1860

    1 Review(s)

    This fine reproduction saber is a faithful copy of ones used. The hand forged blade is British military spec steel that will flex over 20° and return to true. The leather handle is wire wrapped. The brass, 3-branch guard is nicely hand chased and engraved, as is the brass pommel. Blade is beautifully etched with “U.S.,” and “E Pluribus Unum,” along with foliage and military trophies. Steel scabbard has brass throat, rings and drag. Made by Windlass Steelcrafts.

    Total length: 101 cm 
    Blade length: 86 cm 
    Grip length: 10.5 cm 
    Weight: 1050g 
    Blade thickness (base): 0.6cm 
    Blade width (base): 2.8 cm 
    Point of Balance (PoB): 19.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £95.25 Incl. Tax: £114.30

  • US Navy Cutlass M1860

    Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it. Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

    Total length: 80 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.86 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £111.38 Incl. Tax: £133.66

Items 1 to 10 of 19 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76