Sales Hotline: +44 (0)1492 541300

Weapons

6 Item(s)

Set Ascending Direction
per page

Grid  List 

  • US Navy Cutlass M1860

    Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it. Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

    Total length: 80 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.86 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £111.38 Incl. Tax: £133.66

  • Hutton Duelling Sabre

    1 Review(s)

    One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th-century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military sabre. The Milanese fencing master Guiseppe Radaelli is credited with developing this style, while Salvatore Pecoraro introduced refinements which resulted in the technique finally adopted at the Military Masters School in Rome. The hilt designs have been replicated in these training sabres, with stainless steel guards and wire-wrapped sharkskin-pattern grips. The high-carbon flex-tempered steel blades by Windlass Steecrafts closely follow the proportions of the period and have blunt edges and rounded tip for safety. Includes matching, full metal scabbard.

    *The above is the manufacturer's description. We think that the "rounded tip" featured on this blade is far too pointy for safe sparring/thrusting. If you intend to spar with this sword, it is imperative that the tip should be rounded off more and tipped with a rubber or metal cap. 

    Overall: 95cm
    Blade Length: 79cm
    Handle: 15cm
    Weight: 624g

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £104.17 Incl. Tax: £125.00

  • American Revolutionary War Sabre

    Dated to around 1775, the prototype for this handsome sabre is pictured in "Swords & Blades of the American Revolution," a book by George C. Neumann that is very popular with collectors and sword fans. The single-edged, subtly curved blade has two fullers. A narrow, deep fuller almost runs along the entire length of the blade. The other one is shorter, shallower, and much wider. Because of them, this amazing saber weighs less than one kilogram. Nevertheless, our American Revolutionary War sabre is perfectly balanced for delivering mighty cuts: like most powerful cutting weapons, it is slightly top-heavy. The spiraling wooden grip is comfortable and easy to control, and the knuckle bow provides added hand protection.

    Total length: 100.5 cm
    Blade length: 86 cm

    Grip length: 10 cm 
    Weight: 0.95 kg 
    Blade thickness (base): 4.7 mm 
    Blade width (base): 3.3 cm 
    Point of Balance (PoB): 19 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £107.88 Incl. Tax: £129.46

  • Confederate Sabre

    Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability. The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

    Total length: 100.5 cm
    Blade length: 86 cm
    Grip length: 10.5 cm
    Weight: 1.02 kg
    Blade thickness (base): 4.6 mm
    Blade thickness (CoP): 3.9 mm
    Blade width (base): 3 cm
    Blade width (base): 2.5 cm
    Point of Balance (PoB): 19 cm
    Centre of Percussion (CoP): 21 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardSteel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £107.92 Incl. Tax: £129.50

  • Stage Combat Crusader Arming Sword

    Stage combat swords have to meet different requirements than battle-ready swords do. In order to minimize the risk of injury from cuts and thrusts during stage combat with swords, this one-handed stage combat sword has back edges that are at least 3 mm thick everywhere and it even has a rounded point.

    The thick blade of our one-handed stage combat sword makes it somewhat more top-heavy than a comparable battle-ready sword would be. The grip with a spiraling groove is wrapped in genuine leather for increased control and comfort. Our Crusader stage combat sword has a riveted wheel pommel etched with a Crusader cross. The pommel and straight crossguard best date the sword to the 12th/13th century.This Crusader stage combat sword includes a scabbard made of genuine leather with a mount and chape.

    Total length: 99.5 cm
    Blade length: 82 cm
    Grip length: 10.5 cm
    Weight: 1.49 kg
    Blade thickness (base): 3.8 mm
    Blade thickness (CoP): 4 mm
    Blade width (base): 5 cm
    Blade width (CoP): 3.3 cm
    Point of Balance (PoB): 17 cm
    Centre of Percussion (CoP): 17 cm
    Oakeshott type: XVIIId
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardLeather, Wood, Steel

    All sizes are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

  • Stage Combat Arming Sword

    Stage combat swords have to meet different requirements than battle-ready swords do. In order to minimize the risk of injury from cuts and thrusts during stage combat with swords, this one-handed stage combat sword has back edges that are at least 3.5 mm thick everywhere and it even has a rounded point.

    The thick blade of our one-handed stage combat sword makes it somewhat more top-heavy than a comparable battle-ready sword would be. The grip is ridged in three places and is wrapped in genuine leather for increased control and comfort. Our one-handed stage combat sword has a riveted wheel pommel typical of swords that were made between the 10th and 15th centuries, but the curved crossguard places it firmly in the 14th/15th century. This one-handed stage combat sword includes a scabbard made of genuine leather with a mount and chape.

    Total length: 99.5 cm
    Blade length: 82 cm
    Grip length: 10.5 cm
    Weight: 1.49 kg
    Blade thickness (base): 3.8 mm
    Blade thickness (CoP): 4 mm
    Blade width (base): 5 cm
    Blade width (CoP): 3.3 cm
    Point of Balance (PoB): 17 cm
    Centre of Percussion (CoP): 17 cm
    Oakeshott type: XVIIId
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardLeather, Wood, Steel

    All sizes are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

6 Item(s)

Set Ascending Direction
per page

Grid  List 

Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76