home3

The Practical broadswords are all based on authentically styled swords in our Paul Chen collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly. The hardwood grips are leather-covered.

Total Length: 111cm
Blade Length: 86cm
Grip Length: 16.5cm
Weight: 1315g
Point of Balance (PoB): 10cm
Point of Harmonics: 58.5cm
Width at Guard: 4.5cm
Width at Tip: 1.3cm
Thickness at Guard: 0.5cm
Thickness at Tip: 0.45cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic

All dimensions are approximate and may vary from piece to piece.

By customer request Paul Chen has produced a re-enactment version of our SH2250 Bastard sword. The blade is forged in 5160 high-carbon steel, to minimize burring, and the transverse thickness of the guard has been increased, both to provide adequate strength for re-enactment use and to present a safer profile at the ends of the guard.

Another innovation is the provision of an all-leather scabbard, in contrast with the rigid scabbards normally provided with our Practical swords - this is designed both to provide an extra margin of safety when combatants fall on the scabbard in battle and also to minimze the need for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-colored leather to allow customization to the owners taste.

Total Length: 126cm
Blade Length: 97cm
Handle Length: 23cm
Weight: 1644g
Blade Edge: 2.5-3mm
Blade Steel: 5160
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Our Practical Viking Swords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The lobate pommel and down-turned guard are typical of Viking swords of the period, as is the broad blade with its deep, full-length fullers. The sword is well-balanced and, with a weight slightly over 2 lbs, it is very quick.

Total Length: 85cm
Blade Length: 71cm
Weight: 1500g
Blade Thickness (base): 0.5cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic

All dimensions are approximate and may vary from piece to piece.

Our Practical broadswords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds.

Total Length: 92.7cm
Blade Length: 76.2cm
Grip Length: 16.5cm
Weight: 1.105kg
Point of Balance (PoB): 10cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic, Steel

All dimensions are approximate and may vary from piece to piece.

The Roman Gladius was the primary weapon of the Roman Legionary and was used in conjunction with the 'Scutum' (shield) and 'Pilum' (spear). Its design was strongly influenced by the swords used by the Iberian (Spanish) Celts. It was predominantly designed as a thrusting weapon and was in use in one form or another from the 4th Century BC to the 3rd Century AD.

The Pompeii Gladius takes its name from the archaeological site in Italy where, during excavations, 4 such swords were found. The swords are dated to before 79AD - the year that Pompeii was buried in volcanic ash. The Pompeii Gladius, along with the earlier Mainz Pattern Gladius, would have been issued to the garrison at Hadrian’s Wall. Examples can be seen in H. Russell Robinson’s book "What The Soldiers Wore On Hadrians Wall'".

Our Pompeii Gladius features a turned wood pommel and bone grip. The straight blade is hand forged from steel and in housed in a wooden scabbard with red leather covering and decorated brass fittings. This sword is not designed or recommended for contact reenactment (fighting) but is favoured by living history enthusiasts.

Overall Length: 70cm
Blade Length: 48cm
Width: 4.9cm
Grip Length: 10.8cm
Weight: 1135g
Thickness: 5mm
P.O.B: 11cm
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

Our Red Dragon HEMA Synthetic Sparring Arming Sword is designed for the rigours of the HEMA salle and is practically unbreakable. Its combination of durability and value for money make it a popular choice for HEMA schools around the globe. It comes in modular form with many options for customisation and is perfect for beginners.

Our synthetic swords are also great for film and theatrical use, being cheaper and requiring a lot less maintenance than their steel or aluminium counterparts. 

Blade Length: 76cm 
Guard Length: 14.5cm 
Grip Length: 11.5cm 
Pommel Length: 3.5cm
Hilt Length: 16cm 
Total Length: 94cm
Total Weight: 638g 
POB: 14cm 
Material: Plastic, Steel, Brass

All dimensions are approximate and may vary from piece to piece

The Practical Mortuary Hilt Sword is built for the reenactor. The basket is identical to that of the Hanwei SH2004 (no longer available) but the blade is unsharpened, with 1/16” edged and a rounded tip, complying with the combat rules of many re-enactment societies.

The blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while providing resilience and protection against brittleness.

Total Length: 94cm
Blade Length: 77cm
Weight: 907g
Blade Thickness (base): 0.56cm
Blade Width (base): 2.7cm
Centre of Percussion (CoP): 24cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.