home3

We call this elegant edged weapon a "German Longsword," but this type of blade was widely used in Europe during the Late Middle Ages. Its slender shape, acute point and lack of fuller predetermine this sword for use as a thrusting weapon against knightly plate armor. Wielding this blade with two hands greatly increased the probability of scoring a hit in the enemy's weak spot. Our German long sword features a hilt with a striking design: the meander incised in the crossguard is repeated in the pear-shaped pommel. The wooden grip is wrapped in smooth, brown leather for increased control and comfort.

Our German Longsword comes with a brown leather scabbard including a mount and chape.

Total length: 113 cm
Blade length: 91.5 cm
Grip length: 14.5 cm
Weight: 1.59 kg
Blade thickness (base): 4.8 mm
Blade thickness (CoP): 3.8 mm
Blade width (base): 5.1 cm
Blade width (CoP): 3.7 cm
Point of Balance (PoB): 12.5 cm
Centre of Percussion (CoP): 29 cm
Oakeshott type: XVa
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Our Hand-and-a-Half Sword crafted by Paul Chen is replicated from a sword thought to be that of Albrecht II of Austria and represents the pinnacle of beauty and balance in medieval swords. Classically simple in design with a flattened diamond-section blade and cruciform hilt, the original dates from the early part of the 15th century. The “Lion Rampant” emblem of the Habsburg dynasty is engraved in the pommel, while the Passau “Running Wolf” guild mark and a marigold maker’s mark appear on the blade fuller. Both the grip and the scabbard are leather covered over a cord wrap.See Hanwei models SH2034N for the antique-finished version and SH2106 for the “Practical” version of the Hand-and-a-Half sword.

Total length: 113.2cm
Blade length: 88.3cm
Grip length: 16.8cm
Weight: 1470g
Blade thickness (base): 0.61cm
Blade thickness (CoP): 0.32cm
Blade width (base):  5.1cm
Point of Balance (PoB): 14cm
Centre of Percussion (CoP): 54.7cm
Blade: EN45 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather, Steel

All dimensions are approximate and may vary from piece to piece.

Named for the feared 8th century Viking raider, our Godfred Viking Sword is built around a beautifully patterned folded steel blade to replicate the pre-9th century originals. The interwoven leather grip, complemented by a Damascus guard and pommel, is matched by the leather-covered wood scabbard with bronze detailing and integral belt hooks. Superbly balanced, due to the deeply fullered distal tapered blade profile, the Godfred Viking Sword is a true tribute to the legendary Norse smiths.

Total length: 88.3cm
Blade length: 73.1cm
Grip length: 10.2cm
Weight: 1.1kg
Blade thickness (base): 0.52cm
Blade thickness (CoP): 0.32cm
Blade width (base): 4.75cm
Point of Balance (PoB): 10cm
Centre of Percussion (CoP): 50.8cm
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

Mainstay of the Highland warriors of the late 15th and 16th centuries, the Claymore had a uniquely styled hilt that sets it apart from other great swords of the period. Typically of hand-and-a-half length, this versatile weapon could deliver great sweeping slashes or powerful thrusts. Replicated from a surviving museum piece our Claymore (SH2060) is classic in its design, with distinctive sloping quillons terminating in quatrefoils and a high-collared quillon block with langets following the blade fuller. The leather-covered grip is topped by a globate pommel.

Total length: 139.1cm
Blade length: 104.1cm
Grip length: 26.7cm
Weight: 2.21kg
Blade thickness (base): 0.57cm
Blade thickness (CoP): 0.34cm
Blade width (base):  4.52cm
Point of Balance (PoB): 16.6cm
Centre of Percussion (CoP): 78.7cm
Blade: 1566 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Not Included

All dimensions are approximate and may vary from piece to piece.

Oliver Cromwell (1599 – 1658) was a powerful figure in English history during and after the English Civil War, when he rose from the rank of Captain of Horse to Lord Protector of England. His sword, said to have been carried at the battle of Drogheda in 1649, has been remarkably well preserved and is displayed in the permanent collection of the Royal Armouries in Leeds, England. The Paul Chen Cromwell Sword is an accurate replica of the original “mortuary” hilt style and features a blackened guard decorated in a gold foliage pattern with a wire-wound sharkskin grip. As the original sword now lacks a scabbard , we have provided a design typical of the period. This piece of English history is a must for the ECW collector and re-enactor.

Total length: 110.5cm
Blade length: 83.2cm
Grip length: 9.8cm
Weight: 1.47kg
Blade thickness (base) 0.5cm
Blade thickness (CoP): 0.36cm
Blade width (base): 3.4cm
Point of Balance (PoB): 8.9cm
Centre of Percussion (CoP): 53.3cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Threaded
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The Practical Mortuary Hilt Sword is built for the reenactor. The basket is identical to that of the Hanwei SH2004 (no longer available) but the blade is unsharpened, with 1/16” edged and a rounded tip, complying with the combat rules of many re-enactment societies. The blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while providing resilience and protection against brittleness.

Total length: 94cm
Blade length: 77cm
Weight: 907g
Blade thickness (base): 0.56cm
Blade width (base): 2.7cm
Centre of Percussion (CoP): 24cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Excavations of a number of circa 850-900 Viking swords turned up this lovely Damascus specimen in Finland. It has the lobed pommel loved by the Norsemen, but the cross guard contrasts slightly with the typical downcurved versions. The early style blade is well-suited to the quick, slashing blows of the Viking warrior. It is forged from high carbon Damascus steel. It is polished with the fuller etched to show the Damascus construction of the blade. The pommel and cross guard are steel and the grip is leather wrapped wood. The scabbard is wood covered in leather with steel mounts. This is a true fighting sword and one that any Viking would be proud to carry in battle.

Total length: 91 cm
Blade length: 77 cm
Grip length: 9.5 cm
Weight: 0.95 kg
Blade thickness (base): 4.2 mm
Blade thickness (CoP): 3.7 mm
Blade width (base): 4.5 cm
Blade width (CoP): 3.2 cm
Point of Balance (PoB): 17.5 cm
Centre of Percussion (CoP): 19 cm
Blade:  High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather, Steel

All dimensions are approximate and may vary from piece to piece.

The strong and fearless Swiss and Germans originally carried these early weapons, although Bastard swords soon became popular in other parts of continental Europe and the British Isles. The term “Bastard” undoubtedly comes from the fact that the sword, because of its design, has no legitimate claim to being classified as either a uniquely single-handed or two-handed weapon. The Bastard Sword was a weapon developed for the use of the foot soldier and had become quite common by the early 1500’s. The combat styles developed for the Bastard Sword were the particular speciality of the Northern Europe Cultures, with the German nations being at the forefront in its development and use. Our Bastard Sword is finished in an antique patina, making for an outstanding authentic appearance.

Total length: 127.3cm
Blade length: 98.4cm
Grip length: 23.5cm
Weight: 1160g
Blade thickness (base): 0.65cm
Blade thickness (CoP): 0.39cm
Blade width (base):  5cm
Point of Balance (PoB): 14cm
Centre of Percussion (CoP): 63.5cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather, Steel

All dimensions are approximate and may vary from piece to piece.

The  single-hand Marshall Sword by Paul Chen  epitomizes quality and authenticity in broadsword construction. The sword is based on an original, now in a British museum, used by one of England’s finest knights, Sir William Marshall, who served the crown faithfully under Henry II, Richard the Lionheart and Jack Lackland. The Hanwei  SH2000 version features a forged high-carbon steel blade with excellent handling characteristics. Tempered to a tough HRC 54, the blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather-covered with steel mounts. See models SH2001 for the forged-folded version and SH2046 for the “Practical” version of the Marshall sword.

Total length: 101.6cm
Blade length: 84.4cm
Grip length: 10.3cm
Weight: 0.96kg
Blade thickness (base): 0.56cm
Blade width (base):  4.65cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.