home3

Our Practical broadswords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds.

Total Length: 92.7cm
Blade Length: 76.2cm
Grip Length: 16.5cm
Weight: 1.105kg
Point of Balance (PoB): 10cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic, Steel

All dimensions are approximate and may vary from piece to piece.

Our Practical Viking Swords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The lobate pommel and down-turned guard are typical of Viking swords of the period, as is the broad blade with its deep, full-length fullers. The sword is well-balanced and, with a weight slightly over 2 lbs, it is very quick.

Total Length: 85cm
Blade Length: 71cm
Weight: 1500g
Blade Thickness (base): 0.5cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic

All dimensions are approximate and may vary from piece to piece.

By customer request Paul Chen has produced a re-enactment version of our SH2250 Bastard sword. The blade is forged in 5160 high-carbon steel, to minimize burring, and the transverse thickness of the guard has been increased, both to provide adequate strength for re-enactment use and to present a safer profile at the ends of the guard.

Another innovation is the provision of an all-leather scabbard, in contrast with the rigid scabbards normally provided with our Practical swords - this is designed both to provide an extra margin of safety when combatants fall on the scabbard in battle and also to minimze the need for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-colored leather to allow customization to the owners taste.

Total Length: 126cm
Blade Length: 97cm
Handle Length: 23cm
Weight: 1644g
Blade Edge: 2.5-3mm
Blade Steel: 5160
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

The Hsu Sword Bag is very strongly made in a heavy Cordura fabric with leather reinforcing. It will accommodate any of the single-hand Jians.

Length: 113cm
Width: 15cm
Weight: 400g

All dimensions are approximate and may vary from piece to piece.

Due to demand, we offer high-quality Sword Cases for your travelling needs. This will carry any combination of training swords.

These sword cases are perfect for those who travel frequently with their swords across country or across town.

Weight: 950g
Length: 131cm
Width: 20cm

All dimensions are approximate and may vary from piece to piece.

Due to demand, we offer high-quality Sword Cases for your travelling needs. This will carry any combination of training swords. These cases can hold a plethora of swords depending on various shapes and sizes.

Weight: 1200g
Length: 131cm
Width: 25cm

All dimensions are approximate and may vary from piece to piece.

The Paul Chen Agincourt sword made by Hanwei, an English-style single-hand sword, commemorates one of the memorable battles of the Hundred Year’s War between England and France.

Paul Chen  swords are crafted in much the same way as swords were made centuries ago, except now the blades are forged from high-carbon spring steel. The blade finish is far from being polished agian more closley replicating what the medieval swordsmith was able to achieve. Except as noted the grips are leather covered hardwood. Fittings are steel. These swords will appeal to the re-enactor who wants a sword with the same appearance as the originals.

Total Length: 89.6cm
Blade Length: 69.3cm
Grip Length: 12.5cm
Weight: 1.13kg
Blade Width (base): 3.9cm
Point of Balance (PoB): 9.8cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Paul Chen swords are crafted in much the same way as swords were made centuries ago, except now the blades are forged from high-carbon spring steel. The blade finish is far from being polished agian more closley replicating what the medieval swordsmith was able to achieve. Except as noted the grips are leather covered hardwood. Fittings are either steel or solid brass. These swords will appeal to the re-enactor who wants a sword with the same appearance as the originals.

The River Witham Sword was dredged from the River Witham near the town of Lincoln during work carried out in 1788. The sword may be a remnant of the Battle of Lincoln in 1141, but it is more likely that it was made between 1250-1300 CE. The inscription on the blade reads: +NDXOXCHMDRCHDXORVI+.

Total Length: 97.2cm
Blade Length: 80.1cm
Grip Length: 9cm
Weight: 1.58kg
Blade Width (base): 4.9cm
Point of Balance (PoB): 17cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The Henry V Sword is modelled after the sword hung over the tomb of one of England’s great warrior kings. The single-handed cut-and-thrust weapon combines a relatively short sturdy blade with elegant down-swept quillons and a wheel pommel.

This sword comes with high quality scabbard.

Total length: 87.6cm
Blade length: 69.9cm
Grip Length: 9.2cm
Weight: 1330g
Point of Balance (PoB): 8cm
Blade width (base): 4.6cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.