home3

A lot of time and effort went into the design of these guards. A balance between safety, durability and aesthetics is hard to achieve. They are based on an original 15th century historical design. The balls on the end of the quillons allow for a much safer guard with little risk of impalement.

They are manufactured from a very tough plastic which provides a good balance between impact and flexural strength. However, they are plastic and not steel and will break under less pressure than their metal counterparts. If you desire a stronger/heavier guard, we recommend that you purchase a Red Dragon HEMA Stainless Steel Longsword Guard. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Longsword Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 24cm
Depth: 2.8cm
Weight: 40g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 20cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 60g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Length: 90.5cm
Width (Hilt): 5.5cm
Width (Tip): 1.5m
Depth: 1.6cm
Weight: 564g
Materials: Plastic, Steel

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 20cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 60g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 20cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 60g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 20cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 60g
Materials: TPE

*All sizes & weights are approximate.

Our “scent stopper” pommel is classified as an Oakeshott T5 and is quite a complex object to mould. It is made from a special blend of plastic and powdered metal to increase the weight beyond what is achievable with plastic alone. The threaded brass "supertorque" insert offers much better purchase than conventional inserts allowing for a tight fit.

Should you require a heavier pommel please see our Red Dragon HEMA Stainless Steel Pommel. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Scent Stopper Pommel with confidence from the UK’s leading HEMA equipment retailer.

Height: 6.5cm
Diameter (widest): 5cm
Diameter (narrowest): 2.5cm
Thread Size: M8
Weight: 82g
Materials: Plastic, Brass

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Single Hand Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Single Hand and Messer Blades.

Buy the Red Dragon HEMA Synthetic Single Hand Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 11.8cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 34g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Single Hand Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Single Hand and Messer Blades.

Buy the Red Dragon HEMA Synthetic Single Hand Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 11.8cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 34g
Materials: TPE

*All sizes & weights are approximate.