home3

The Roman Gladius was the primary weapon of the Roman Legionary and was used in conjunction with the 'Scutum' (shield) and 'Pilum' (spear). Its design was strongly influenced by the swords used by the Iberian (Spanish) Celts. It was predominantly designed as a thrusting weapon and was in use in one form or another from the 4th Century BC to the 3rd Century AD.

The Pompeii Gladius takes its name from the archaeological site in Italy where, during excavations, 4 such swords were found. The swords are dated to before 79AD - the year that Pompeii was buried in volcanic ash. The Pompeii Gladius, along with the earlier Mainz Pattern Gladius, would have been issued to the garrison at Hadrian’s Wall. Examples can be seen in H. Russell Robinson’s book "What The Soldiers Wore On Hadrians Wall'".

Our Pompeii Gladius features a turned wood pommel and bone grip. The straight blade is hand forged from steel and in housed in a wooden scabbard with red leather covering and decorated brass fittings. This sword is not designed or recommended for contact reenactment (fighting) but is favoured by living history enthusiasts.

Overall Length: 70cm
Blade Length: 48cm
Width: 4.9cm
Grip Length: 10.8cm
Weight: 1135g
Thickness: 5mm
P.O.B: 11cm
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

The Paul Chen Agincourt sword made by Hanwei, an English-style single-hand sword, commemorates one of the memorable battles of the Hundred Year’s War between England and France.

Paul Chen  swords are crafted in much the same way as swords were made centuries ago, except now the blades are forged from high-carbon spring steel. The blade finish is far from being polished agian more closley replicating what the medieval swordsmith was able to achieve. Except as noted the grips are leather covered hardwood. Fittings are steel. These swords will appeal to the re-enactor who wants a sword with the same appearance as the originals.

Total Length: 89.6cm
Blade Length: 69.3cm
Grip Length: 12.5cm
Weight: 1.13kg
Blade Width (base): 3.9cm
Point of Balance (PoB): 9.8cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Paul Chen swords are crafted in much the same way as swords were made centuries ago, except now the blades are forged from high-carbon spring steel. The blade finish is far from being polished agian more closley replicating what the medieval swordsmith was able to achieve. Except as noted the grips are leather covered hardwood. Fittings are either steel or solid brass. These swords will appeal to the re-enactor who wants a sword with the same appearance as the originals.

The River Witham Sword was dredged from the River Witham near the town of Lincoln during work carried out in 1788. The sword may be a remnant of the Battle of Lincoln in 1141, but it is more likely that it was made between 1250-1300 CE. The inscription on the blade reads: +NDXOXCHMDRCHDXORVI+.

Total Length: 97.2cm
Blade Length: 80.1cm
Grip Length: 9cm
Weight: 1.58kg
Blade Width (base): 4.9cm
Point of Balance (PoB): 17cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The Henry V Sword is modelled after the sword hung over the tomb of one of England’s great warrior kings. The single-handed cut-and-thrust weapon combines a relatively short sturdy blade with elegant down-swept quillons and a wheel pommel.

This sword comes with high quality scabbard.

Total length: 87.6cm
Blade length: 69.9cm
Grip Length: 9.2cm
Weight: 1330g
Point of Balance (PoB): 8cm
Blade width (base): 4.6cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The single-hand Lionheart Sword is typical of the cruciform-hilt style of the crusading knights of Europe in the 12th and 13th centuries. The wheel pommel and slightly turned-down bow-tie guard make this a very attractive sword.

Total Length: 85.2cm
Blade Length: 68.6cm
Grip Length: 9.2cm
Weight: 1.13kg
Blade Width (base): 3.4cm
Point of Balance (PoB): 10.8cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Named for the feared 8th century Viking raider, our Godfred Viking Sword is built around a beautifully patterned folded steel blade to replicate the pre-9th century originals.

The interwoven leather grip, complemented by a Damascus guard and pommel, is matched by the leather-covered wood scabbard with bronze detailing and integral belt hooks. Superbly balanced, due to the deeply fullered distal tapered blade profile, the Godfred Viking Sword is a true tribute to the legendary Norse smiths.

Total length: 88.3cm
Blade length: 73.1cm
Grip length: 10.2cm
Weight: 1.1kg
Blade thickness (base): 0.52cm
Blade thickness (CoP): 0.32cm
Blade width (base): 4.75cm
Point of Balance (PoB): 10cm
Centre of Percussion (CoP): 50.8cm
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

The single-hand Marshall Sword by Paul Chen epitomizes quality and authenticity in broadsword construction. The sword is based on an original, now in a British museum, used by one of England’s finest knights, Sir William Marshall, who served the crown faithfully under Henry II, Richard the Lionheart and Jack Lackland.

The Hanwei SH2000 version features a forged high-carbon steel blade with excellent handling characteristics. Tempered to a tough HRC 54, the blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather-covered with steel mounts.

See model SH2046 for the “Practical” version of the Marshall sword.

Total Length: 101.6cm
Blade Length: 84.4cm
Grip Length: 10.3cm
Weight: 0.96kg
Blade Thickness (base): 0.56cm
Blade Width (base):  4.65cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.