Sales Hotline: +44 (0)1492 541300

American Military Swords

AMERICAN MILITARY SWORDS

Browse our American Military Swords

We have a good range of American military swords for sale. Our American military swords are historically accurate and have been replicated from genuine historical military issue swords from American history. Our military swords are suitable for display, re-enactment, ceremonies, theatre and living history.

6 Item(s)

Set Descending Direction
per page

Grid  List 

  • Nashville Plow Works Cavalry Sabre

    This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs.

    Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

    Total length: 99 cm
    Blade length: 86.5 cm
    Grip length: 11.5 cm
    Weight: 860g
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.2 mm
    Blade width (base): 2.9 cm
    Blade width (base): 2.4 cm
    Point of Balance (PoB): 9 cm
    Centre of Percussion (CoP): 26.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £149.17 Incl. Tax: £179.00

  • Confederate Sabre

    Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability.

    The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

    Total length: 100.5 cm
    Blade length: 86 cm
    Grip length: 10.5 cm
    Weight: 1.02 kg
    Blade thickness (base): 4.6 mm
    Blade thickness (CoP): 3.9 mm
    Blade width (base): 3 cm
    Blade width (base): 2.5 cm
    Point of Balance (PoB): 19 cm
    Centre of Percussion (CoP): 21 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £113.33 Incl. Tax: £136.00

  • Yankee Officer's Sabre 1860

    This fine reproduction sabre is a faithful copy of the ones used during the American Civil War. The hand-forged blade is British military spec steel that will flex over 20° and return to true. The leather handle is wire wrapped. The brass, 3-branch guard is nicely hand chased and engraved, as is the brass pommel.

    Blade is beautifully etched with “U.S.,” and “E Pluribus Unum,” along with foliage and military trophies. Steel scabbard has a brass throat, rings and drag. Made by Windlass Steelcrafts.

    Total length: 101 cm 
    Blade length: 86 cm 
    Grip length: 10.5 cm 
    Weight: 1050g 
    Blade thickness (base): 0.6cm 
    Blade width (base): 2.8 cm 
    Point of Balance (PoB): 19.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £119.17 Incl. Tax: £143.00

  • American Revolutionary Hanger

    Based on an original of the period, Paul Chen's  Revolutionary War Hanger (or Cutte) is accurately sized and antiqued to replicate a museum piece. The fully tempered, high carbon steel blade has a distal taper, with fullers on both sides along the spine, and is light and quick. The hilt fittings are cast in solid steel, matching the locket and chape of the leather-covered scabbard.

    Overall Length: 79cm
    Blade Length: 63cm
    Weight: 850g
    Blade: 1566 High Carbon Steel
    Edge: Sharp
    Pommel: Nut
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £186.20 Incl. Tax: £223.44

  • American Revolutionary War Sabre

    Dated to around 1775, the prototype for this handsome sabre is pictured in "Swords & Blades of the American Revolution," a book by George C. Neumann that is very popular with collectors and sword fans. The single-edged, subtly curved blade has two fullers. A narrow, deep fuller almost runs along the entire length of the blade. The other one is shorter, shallower, and much wider. Because of them, this amazing saber weighs less than one kilogram.

    Nevertheless, our American Revolutionary War sabre is perfectly balanced for delivering mighty cuts: like most powerful cutting weapons, it is slightly top-heavy. The spiraling wooden grip is comfortable and easy to control, and the knuckle bow provides added hand protection.

    Total length: 100.5 cm
    Blade length: 86 cm

    Grip length: 10 cm 
    Weight: 0.95 kg 
    Blade thickness (base): 4.7 mm 
    Blade width (base): 3.3 cm 
    Point of Balance (PoB): 19 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £112.50 Incl. Tax: £135.00

  • US Navy Cutlass M1860

    Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it.

    Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

    Total length: 80 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.86 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £126.67 Incl. Tax: £152.00

6 Item(s)

Set Descending Direction
per page

Grid  List 

Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76