Weapons

Known first as a Cossack weapon that was used on horseback, the sword type was made the official officer’s sword of the Soviet Union. Brass pommel is marked with star, sickle and hammer. Grip is hand carved hardwood. Tempered high carbon blade. Made by Windlass Steelcrafts.

Total Length: 96cm
Blade Length: 82.5cm
Weight: 1026g
Edge: Blunt - Sharpenable
Point of Balance: 17cm
Thickness at Base: 0.6cm
Width at Base: 3cm
Grip Length: 10cm
Pommel: Nut

All dimensions are approximate and may vary from piece to piece.

This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs.

Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

Total Length: 99cm
Blade Length: 86.5cm
Grip Length: 11.5cm
Weight: 860g
Blade Thickness (base): 4.4mm
Blade Thickness (CoP): 4.2mm
Blade Width (base): 2.9cm
Blade Width (base): 2.4cm
Point of Balance (PoB): 9cm
Centre of Percussion (CoP): 26.5cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Steel, Brass

All dimensions are approximate and may vary from piece to piece.

Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability.

The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

Total Length: 100.5cm
Blade Length: 86cm
Grip Length: 10.5cm
Weight: 1.02kg
Blade Thickness (base): 4.6mm
Blade Thickness (CoP): 3.9mm
Blade Width (base): 3cm
Blade Width (base): 2.5cm
Point of Balance (PoB): 19cm
Centre of Percussion (CoP): 21cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Steel, Brass

All dimensions are approximate and may vary from piece to piece.

This fine reproduction sabre is a faithful copy of the ones used during the American Civil War. The hand-forged blade is British military spec steel that will flex over 20° and return to true. The leather handle is wire wrapped. The brass, 3-branch guard is nicely hand chased and engraved, as is the brass pommel.

Blade is beautifully etched with “U.S.,” and “E Pluribus Unum,” along with foliage and military trophies. Steel scabbard has a brass throat, rings and drag. Made by Windlass Steelcrafts.

Total Length: 101cm 
Blade Length: 86cm 
Grip Length: 10.5cm 
Weight: 1050g 
Blade Thickness (base): 0.6cm 
Blade Width (base): 2.8cm 
Point of Balance (PoB): 19.5cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Steel, Brass

All dimensions are approximate and may vary from piece to piece.

Dated to around 1775, the prototype for this handsome sabre is pictured in "Swords & Blades of the American Revolution," a book by George C. Neumann that is very popular with collectors and sword fans. The single-edged, subtly curved blade has two fullers. A narrow, deep fuller almost runs along the entire length of the blade. The other one is shorter, shallower, and much wider. Because of them, this amazing saber weighs less than one kilogram.

Nevertheless, our American Revolutionary War sabre is perfectly balanced for delivering mighty cuts: like most powerful cutting weapons, it is slightly top-heavy. The spiraling wooden grip is comfortable and easy to control, and the knuckle bow provides added hand protection.

Total Length: 100.5cm
Blade Length: 86cm
Grip Length: 10cm 
Weight: 0.95kg 
Blade Thickness (base): 4.7mm 
Blade Width (base): 3.3cm 
Point of Balance (PoB): 19cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it.

Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

Total Length: 80cm
Blade Length: 65.5cm
Grip Length: 11cm
Weight: 0.86kg
Blade Thickness (base): 4.3mm
Blade Width (base): 3.1cm
Point of Balance (PoB): 11cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

PLEASE NOTE THAT NO GUARANTEE IS OFFERED WITH THIS PRODUCT. IF YOUR WASTER BREAKS NO REPLACEMENT WILL BE OFFERED AS THE MANUFACTURER WILL NOT SUPPLY US WITH A REPLACEMENT. IF YOU WANT A MORE DURABLE WASTER PLEASE PURCHASE OUR SYNTHETIC SPARRING SWORDS.

The advantages of this one handed training sword made of wood are obvious. On the one hand, the risk of injury is significantly lower. On the other, this wooden sword can withstand hard blows while your valuable steel sword is safe at home. Of course, even hardwood is not indestructible and can break along the grain, but this one handed training sword should be your first choice for practicing.

The wheel pommel and crossguard are made of darker wood to emphasize that it looks like a sword from the 12th to 15th century.

Total Length: 99.5cm
Blade Length: 79.5cm
Grip Length: 11.5cm
Weight: 0.54kg
Point of Balance (PoB): 22cm
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

PLEASE NOTE THAT NO GUARANTEE IS OFFERED WITH THIS PRODUCT. IF YOUR WASTER BREAKS NO REPLACEMENT WILL BE OFFERED AS THE MANUFACTURER WILL NOT SUPPLY US WITH A REPLACEMENT. IF YOU WANT A MORE DURABLE WASTER PLEASE PURCHASE OUR SYNTHETIC SPARRING SWORDS.

The advantages of this two handed training sword made of wood are obvious. On the one hand, the risk of injury is significantly lower. On the other, this wooden sword can withstand hard blows while your valuable steel sword is safe at home. Of course, even hardwood is not indestructible and can break along the grain, but this two handed training sword should be your first choice for practicing. The wheel pommel and crossguard are made of darker wood to emphasize that it looks like a sword from the 12th to 15th century.

Total Length: 121cm
Blade Length: 92.5cm
Grip Length: 20cm
Weight: 0.59kg
Point of Balance P(oB): 21cm

All dimensions are approximate and may vary from piece to piece.

PLEASE NOTE: NO WARRANTY IS OFFERED WITH THIS PRODUCT. IF YOUR WASTER BREAKS, NO REPLACEMENT WILL BE OFFERED AS THE MANUFACTURER WILL NOT SUPPLY US WITH A REPLACEMENT. IF YOU WANT A MORE DURABLE WASTER PLEASE PURCHASE OUR SYNTHETIC SPARRING SWORDS.

The gladius was the sword of choice for the Roman legions, and many gladiators also chose to use the double-edged sword when they were fighting for their freedom and lives in the Colosseum.After a gladiator in ancient Rome had won his freedom, he was awarded a wooden gladius like this one, called a Rudis, as a symbol of his freedom. Our Rudis is a great retirement gift for military personnel or police officers.

Our training gladius is based on the classic Roman gladius and made entirely of hardwood. The pommel and guard are darker for visual interest. If you plan to use this wooden gladius as a training sword, be careful: the blade is made of wood but it does have a sharp point.

Total Length: 69cm
Blade Length: 51cm 
Blade Width: 4.5cm
Blade Thickness: 1.6cm
Weight: 340g
Scabbard: None

All dimensions are approximate and may vary from piece to piece.